PDA

View Full Version : The C5 at the top of this page

Uk422
10-05-2003, 07:08 AM
Hi, new member here :wave:but i do post on other corvette forums so you probably bumped into me before.......so many forums for the worlds best car ....sounds good to me.
The blue C5 at the right/top of the page looks like it is running 18" wheels, are these wheels like BBS alloys?? and will they fit the ZR1 sizes??
Thanks

:chevy:
fatherlarry
10-05-2003, 11:19 AM
Welcome aboard! The Z at the top of the page is wearing wheels from West Coast Corvettes. Give them a call, or go to the link below. They should be able to tell you if they have what you're looking for on the ZR1. Show some pics of your ZR. Thanks for joining us, hope you enjoy the forum.

http://www.westcoastcorvettes.com Good luck:chevy: ;bt
TopVette
10-06-2003, 08:00 AM
Welcome:luxhello: :chevy: :wave:
z06joe
10-06-2003, 08:05 AM
ZZZZZZZZ are great.

New member Welcome aboard!:luxhello: :wavey:
DavisZR1
10-06-2003, 12:32 PM
Welcome Welcome ;bt ;bt :chevy:
Gerry
10-06-2003, 02:41 PM
Welcome to the site... You will get the Answers here..:luxhello:

Gerry :usaribbon :chevy:
Uk422
10-07-2003, 05:07 AM
Thanks guy's ,i notice some of you have Z06s, a freind in our town in the UK has a bright yellow 03 Z06 he drives it hard and has done something like 12,000 miles since may,gets 12.6 down the strip on a very hot day and the car comes back for more.
As soon as i get some pics of mine i will post them:cheers: ;bt ;bt
TopVette
10-07-2003, 08:01 AM
Pics would be great:chevy: ;bt :wavey:
Uk422
10-09-2003, 05:01 AM
At the moment myZ is away having all my engine work done,ive got my lexan glass from the states last week,next is a high rise CF hood then some lightweight 18"alloys and sticky rubber.

The car sits on coilovers so i can get it reasonably low,once i fit all the other parts i will get a reputable vette paint shop in the UK to align the hood and spray it but have it so ZR1 will be seen across the hood in carbonfibre it will be done in like a flowing swathe type from the headlight on the passenger side to the drivers side,i suppose they can do this by masking out ZR1 then spraying the hood ,,should be subtle but effective and as soon as this is done i will post some photos.;bt :usaribbon :chevy: