SS Brake Lines

[Brian99c5frc]

Want to install a set of Goodridge SS brake lines on my 99 FRC and want some help. Should I install a line(left rear) and bleed, then continue on to the right rear etc. or install all lines then bleed? Also does the gearbox share the same fluid with the differential? Thanks in advance. Brian

[MKOTZE]

Originally posted by Brian99c5frc
Want to install a set of Goodridge SS brake lines on my 99 FRC and want some help. Should I install a line(left rear) and bleed, then continue on to the right rear etc. or install all lines then bleed? Also does the gearbox share the same fluid with the differential? Thanks in advance. Brian Hello Brian99c5frc, The best way to install the stainless steel brake hoses is to replace all of the hoses and then start bleeding them. First you bleed the right rear then the left rear,then the right front and then the left front. During the bleeding procedure make sure you maintain the proper fluid level in the master cylinder by checking the fluid level after each wheel. When your assistant is pumping the brakes remind them to pump slowly. The gearbox does not share any fluid with the differential. The gearbox takes ATF and the rear end takes 80/90 gear lube two very different fluids. Good Luck.:chevy: MKOTZE